CT-5102 2-Channel Encoder Input /5VDC

the module supports two channels of encoder input.
each encoder channel supports A/B incremental encoder or pulse-directional encoder input.
each encoder channel supports orthogonal A/B signal input, input voltage 5V, and it supports source and sink input.
the incremental encoder mode supports x1/ x2 / x4 frequency multiplication to be selectable.
the pulse – direction mode supports nondirectional signal, pulse input only.
each encoder channel supports 1 digital input signal with an input voltage of 5Vdc or 24Vdc.
each encoder channel supports 1 digital output signal with an output voltage of 5Vdc.
each encoder channel supports 1 way of 5V power output, which can be connected to the encoder for power supply.
the module internal bus and field input adopt magnetic isolation.
the module carries 16 LED indicators.
the maximum input frequency of the encoder supported by the module is 1.5MHz.
the module supports measurement function, it could detect the load speed or input signal frequency.

GEneral parameters
Power	Max.60mA@5.0Vdc
Isolation	I/O to internal bus: magnetic isolation (3KVrms)
Field Power	Nominal:24Vdc, Range:20-28Vdc
Wiring	I/O Wiring： Max.1.5mm²(AWG 16)
Mounting Type	35mmDIN-Rail
Size	1151475mm
Weight	65g

Input parameters
Channel Number	2-channel encoder
LED Indicator	16 channel input LED indicator
Encoder signal voltage range	ABZ input standard 5Vdc, range ±10%
Encoder input impedance	Internal pull-up or pull-down resistance 4.7K
Encoder filtering time	Could be set, the default value is 0.5 us
Encoder count frequency	<1.5MHz
Encoder frequency multiplication mode	x1/x2/x4
Encoder measurement function	Load speed or input signal frequency measurement
DI turn-on voltage	Min.5Vdc to Max.28Vdc
DI turn-off voltage	Max.2.7Vdc
DI turn-on current	Max.5mA/channel@28V
DI input impedance	>10.0kΩ
DI input delay Off to ON	Max.3ms
DI input delay ON to OFF	Max.2ms
DO output voltage	5V, range ±10%
DO output current	Max.500mA
DO output sink current	Max.5uA